|Application:||Uninterruptible Power Supplies||Mounting Type:||PCB Mounting|
|Principle:||Null Balance||Standard:||High Precision|
|Product Name:||Hall Effect Current Sensor||Operating Temperature:||-40～+85|
hall effect high current sensor,
closed loop current transducer
TBC2000LF Hall Effect Dc Current Transducer 4 To 400mA Output
TBC2000LF series current sensor is a closed loop device based on the measuring principle of the hall effect and null balance method , with a galvanic isolation between primary and secondary circuit, the size of primary doesn’t affect test precision, no matter the location of primary in the hole of current sensor, It can really measure resolution 1000:1 and it uses for precision measurement of DC, AC and pulse current.
Rated input Ipn)
|Measure resister||with±15V @±2000Amax 0(min) 1.0(max)||Ω|
|with±24V @±2000Amax 0(min) 20(max)||Ω|
|with±24V @±3000Amax 0(min) 3.0(max)||Ω|
|coil resister||@ 85℃ 34||Ω|
Rated output (Isn)
|Zero offset current||@Ip=0 ≤±0.2||mA|
|Offset current drift||@ -40℃～85℃ ±0.5||mA|
|Response time||@100A/μS,10%-90% ＜1||μs|
|Galvanic isolation||@ 50HZ, AC, 1min 6||KV|
|di/dt accurately followed||>100||A/μs|
|Bandwidth||@ -3dB DC…150||KHz|
AC variable speed drives and servo motor drives
Static converters for DC motor drives
Battery supplied applications
Uninterruptible Power Supplies (UPS)
Switched Mode Power Supplies (SMPS)
Power supplies for welding applications.
|Mechanical dimension(for reference only)|
1. All dimensions are in mm.
2. General tolerance ±1mm.
Directions for use
Is will be in a forward direction when the Ip flows according to the direction of the arrowhead.
The primary conductor should be≤120℃.
The dynamic performance (di/dt and the response time) is the best when the primary hole is fully filled with the bus bar.
Pulse current signal response characteristic Effects of impulse noise
Contact Person: Wu